Fire doors are one of the most important safety features in any building, but they're also one of the most misunderstood. A fire door that's been badly fitted, wedged open or poorly maintained may not protect anyone.

We install fire-rated doors in commercial buildings, rental properties and family homes. Here's what you need to know.

What do FD30 and FD60 mean?

The "FD" rating tells you how long the door is designed to resist fire when correctly installed:

  • FD30: around 30 minutes of fire resistance
  • FD60: around 60 minutes of fire resistance

Many fire doors also have an "S" suffix (for example FD30S), meaning they're designed to restrict the passage of smoke as well. Smoke is often more dangerous than flames.

Where are fire doors needed?

It depends on the building and how it's used, but common examples include:

  • Escape routes in commercial and public buildings
  • Houses in multiple occupation (HMOs)
  • Doors onto the stair after a loft conversion
  • Doors between an integral garage and the house
  • Flats opening onto a common stair

Your building warrant drawings or fire risk assessment will normally specify where fire doors are required and what rating they need.

A fire door is a system, not just a door

This is the key point. A fire door only performs as tested if all of its components are right:

  • The door leaf must be a certified fire door
  • The frame must be suitable for the rating
  • Gaps around the door must be within the correct tolerances
  • Intumescent strips that expand in heat to seal the gap
  • Smoke seals where required
  • Hinges, usually three, rated for fire doors
  • A self-closing device where required
  • Ironmongery and glazing that's compatible with the door's rating

Get any one of these wrong and the door may not hold back fire for its rated time.

Common problems we see

  • Gaps that are far too large
  • Missing or painted-over intumescent strips
  • Standard hinges or locks fitted to fire doors
  • Doors trimmed too much at the bottom to clear flooring
  • Fire doors wedged open

Replacing old doors with fire doors

In older properties, upgrading to fire doors often means replacing the frames as well. We recently removed old Victorian doors and frames in a client's home and fitted new fire-rated doors throughout. You can read more in our post on replacing Victorian doors and frames.

Get it done properly

If you're a landlord, facilities manager or homeowner who needs fire doors fitted or upgraded, we can help. Find out more about our fire door installation service or contact us for a free quote.

*Always follow your fire risk assessment, building warrant and the door manufacturer's instructions.*

Planning a project like this?

Astonish is a family-run joinery and building firm based in Newmains and working across Scotland. Tell us about the job for straight advice and a free written quote.

Get a free quote Call 07473 354 445